GS LARGE DISPLACEMENT DITCHER
GS LARGE DISPLACEMENT DITCHER
Device for right side movement (in addition to the clearance gauge of the tractor) of a mono/double or mono-wheel ditcher that excavates ditches to a maximum depth of 50 to 78 cm and wall inclination of 30°. The ditch is at a maximum distance of 2.4 m from the centre of the tractor. The excavated soil is only sent to the right side.
Typically used to excavate temporary or permanent drains placed completely outside of the tractor’s wheel track.
Main characteristics:
- Mechanical motion transmission from the tractor to the excavation device
- Hydraulic movement of the arm through quick couplings of the tractor
- Vertical positioning within clearance gauge for transport setup
- Possibility of disconnecting the ditcher from the GS device to use it in the conventional mode
- 1 excavation rotor and 1 cleaning disc (only for mono-wheel models)
- Bench-run-in bevel gears with helical teeth
- Drop box to raise pto (except for models DMR25-25B/GS and DMR35-35B/GS)
- Spreading distance control of the excavated soil through mechanical regulation of the side covers
- Third point hydraulic device for easier ditch entry operations (except for models DMR25-25B/GS and DMR35-35B/GS)
Model | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|---|---|---|---|
MONO-WHEEL | ![]() | ||||||||
DMR25/GS | 60-70 | 45-52 | 0.8 / 1.2 | 540 | 30° | 76 | 18 | 50 | 920 |
DMR35/GS | 65-80 | 48-60 | 0.8 / 1.2 | 540 | 30° | 82 | 18 | 58 | 950 |
DMR45/GS | 80-100 | 60-75 | 0.8 / 1.2 | 540 | 30° | 100 | 25 | 68 | 1130 |
DMR55/GS | 90-120 | 67-89 | 0.8 / 1.2 | 540 | 30° | 115 | 25 | 78 | 1190 |
MONO/DOUBLE WHEEL | ![]() | ||||||||
DMR25B/GS | 65-80 | 48-60 | 0.8 / 1.2 | 540 | 30° | 80 | 18 | 50 | 940 |
DMR35B/GS | 70-90 | 52-67 | 0.8 / 1.2 | 540 | 30° | 90 | 18 | 64 | 970 |
DMR45B/GS | 100-120 | 75-89 | 0.8 / 1.2 | 540 | 30° | 104 | 25 | 69 | 1200 |
DMR55B/GS | 110-140 | 82-104 | 0.8 / 1.2 | 540 | 30° | 114 | 25 | 77 | 1300 |
DMR45B-45°/GS | 130-160 | 97-119 | 0.8 / 1.2 | 540 | 45° | 152 | 30 | 60 | 1450 |
GSI LARGE DISPLACEMENT HYDRAULIC DITCHER
GSI LARGE DISPLACEMENT HYDRAULIC DITCHER
Device for right side movement (in addition to the clearance gauge of the tractor) of a mono/double or mono-wheel ditcher that excavates ditches to a maximum depth of 50 to 87 cm and wall inclination of 30° or 45°. It is fitted with an articulated arm that makes it possible to perform excavation even where there are obstacles and significant height differences of up to 1.8 m below the road surface and 3.2 m from the centre of the tractor.
The excavated soil is only sent to the right side.
Typically used to excavate temporary or permanent drains placed completely outside of the tractor’s wheel track.
Main characteristics:
- Independent hydraulic system for ditcher drive and arm movement, complete with cooling system
- Arm translation and retraction to return within clearance gauge for transportation
- The drives are controlled via an electric-hydraulic joystick
- Ditcher self-levelling device
- Hydro-pneumatic controlled support wheel
- Three-point end coupling for arm, to connect the ditcher or other driven equipment to the PTO
Model | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|
GSI | 150-180 | 112-134 | 0.8 / 1.2 | 540 | 1750 |
DSL HYDRAULIC SIDE DEVICE
DSL HYDRAULIC SIDE DEVICE
Device for right side displacement (outside of the tractor clearance gauge) of multiple driven tools: mono-wheel ditcher, roadside clearer, weed cutter head and guardrail mower. It is equipped with a tilting telescopic arm to perform work below and above the road surface at a maximum distance from the centre of the tractor of 2.5-3.3 m based on the applied tool.
Used for typical road-side maintenance operations: mowing, creating mounds or drainage ditches.
Main characteristics:
- Independent hydraulic system for tool drive and arm movement, complete with cooling system
- Arm translation and inclination to return within clearance gauge for transportation
- The drives are controlled via an electric-hydraulic joystick
- Rear or front application on tractor
Model | ||||
---|---|---|---|---|
DSL | 60-80 | 45-60 | 540 | 530 |
HYDRAULIC DITCHERS
HYDRAULIC DITCHERS
Mono-wheel or double/mono-wheel ditchers with hydraulic drive to excavate ditches with a maximum depth of 35 to 65 cm and wall angle of 30°. The excavated soil is only sent to the right side.
Specifically designed for installation on excavator arms or strimmers of appropriate size and adequate features (oil flow rate and pressure).
Main characteristics:
- Drive through quick coupling of the arm (3 pipes: delivery, return and drainage)
- Universal coupling for arm
- 1 excavating rotor and 1 cleaning disc (DMR25B-I and DMR35B-I) or 1 excavating rotor (DMR20-I)
- Bench-run-in bevel gears with helical teeth
- Spreading distance control of the excavated soil through hydraulic regulation of the side covers
Model | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|---|---|---|---|
DMR20-I | 0.8 / 1.2 | 540 | 30° | 60 | 18 | 35 | 206 | 100-110 | 140 |
DMR25B-I | 0.8 / 1.2 | 540 | 30° | 80 | 18 | 55 | 310 | 100-110 | 180 |
DMR35B-I | 0.8 / 1.2 | 540 | 30° | 90 | 18 | 65 | 350 | 100-110 | 200 |
GRM60 GUARDRAIL MOWER
GRM60 GUARDRAIL MOWER
Device to mow grass along the road sides also when there are guardrails, signs or any other type of obstacle. It features two cutting discs installed on independent arms, the outermost can tilt by 180° to pass over obstacles taller than 1.7 m; each disc is equipped with rubber edge and spring return to automatically go around poles while mowing.
Intended for professional users who manage vegetation maintenance on long stretches of road.
Main characteristics:
- Independent hydraulic system to drive cutting discs and machine service movements, complete with cooling system.
- Arm translation and tilting to return within clearance gauge for transportation
- The drives are controlled via an electric-hydraulic joystick
- Cutting motion automatically stops when the external disc lifts
- Discs installed on a floating parallelogram system and equipped with central idle support for constant adaptation to the soil profile
- Rear or front application on tractor with the possibility of working on the right or the left through simple reset-up
- Chassis with high structural resistance
Model | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|---|
GRM60-SPIDER | 85-110 | 63-82 | 0,8/2,5 | 1000 | 150 | 1500 |
DISCOVERY 840 GUARDRAIL MOWER
DISCOVERY 840 GUARDRAIL MOWER
This device can be applied to road-side maintenance vehicles, particularly suited for Unimog vehicles. To mow grass along the road sides also when there are guardrails, signs or any other type of obstacle. It features two cutting discs installed on independent arms, the outermost can tilt by 180° to pass over obstacles taller than 1.7 m; each disc is equipped with rubber edge and spring return to automatically go around poles while mowing.
Intended for professional users who manage vegetation maintenance on long stretches of road.
Main characteristics:
- Cutting disc drive and service movements through the vehicle’s oil flow
- Arm translation and tilting to return within clearance gauge for transportation
- The drives are controlled via the electric-hydraulic joystick of the vehicle
- Cutting motion automatically stops when the external disc lifts
- Discs installed on a floating parallelogram system and equipped with central idle support for constant adaptation to the soil profile
- Chassis with high structural resistance
Model | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|---|---|
DISCOVERY 840 | 85-110 | 63-82 | 0,8/2,5 | 1000 | 150 | 750 |